Windows XP

 

Please follow the steps below to verify that your modem is installed correctly on Windows XP. 

 

  1. Press the Start button on the Windows task bar and select Control Panel.  The following screen will appear:

 

 

  1. Double click on Phone and Modem Options and click on the Modems tab.  The following screen will appear:

 

 

All of the Modems installed on your system will be listed above. In this example, there is a MultiTech Systems MT3824ZPW modem installed on COM port 4.   Please note: If you do not see a modem here, there is not a modem installed on your system.  You will not be able to Fax without a modem or fax board (Brooktrout, Eicon, NMS, GammaLink, etc).  Also, you may see more than one modem listed. 

 

3.      Next click on the Properties button and then click on the Diagnostics tab.  The

     following screen will appear:

 

 

 

 

  1. To test the modem and verify that it is installed correctly, press the Query Modem button.  You should see something similar to the following:

 

 

  1. As you can see, there are now several lines of information in the box above the Query Modem button.  As long as you see the lines of information the modem is installed correctly.  If you do not get any information, please reinstall the modem or contact the hardware manufacturer for assistance. NROTC does not provide hardware technical support.  We only provide technical support for our TSR software related problems.